Step 1:
Locate the quick release skewer, this can be found in the kit box.

Step 2:
Remove the cone shaped nut and spring from the end of the skewer.

Step 4:
Refit the spring (small end into the wheel) then thread the nut onto the protruding skewer.

Step 5:
The picture below shows a correctly fitted quick release skewer

Step 6:
Place the wheel onto the forks ensuring the fork dropouts rest on the threaded axle of the wheel.

IMPORTANT: THE WHEEL AXLE IS DESIGNED TO BE SHORTER THAN A NORMAL AXLE.

Step 7:
Holding the skewer lever in the open position (marked on the lever) hand tighten the nut.

Step 8:
Once the nut has been tightened close the lever ensuring the wheel is firmly secured